Technical Data – Glow

Physical Properties

Physical PropertiesASTMValue
Color (Part A)Green Glow
Color (Part B)Green Glow
Color (mixed)**Green Glow
ConsistencyPaste
Mix Ratio 1:1 by volume
Working Time* CC88115 Minutes
Full Cure Time* CC88112 Hours
Hardness, Shore D D224075 (+/-5)
ConductivityNone
Compressive Strength, 7 days D69510,000 psi
Specific Gravity, mixed 1.09 g/ml
Bond Strength C8821,500 psi
Temp. Resistance, Continuous -20°F - 200°F
Temp. Resistance, Intermittent Up to 250°F
% VOC EPA Method 240

* Based on testing at 75° (24C)
** Safety colors also available

Linear Coverage (feet)***

Tread Width254ml (8.6 fl.oz.) cartridge400ml (13.6 fl.oz.) cartridge
0.5"60'110'
1.0"33'60'

*** Based on 1/32″ thickness using Form Tape FT3315-03

Safety Data Sheets

SDS, Form-A-Tread, Part A, Resin
SDS, Form-A-Tread, Part B, Hardener

For Best Results

  • Warm cartridge to a minimum of 75°F (24°C) before use.
  • Clean and dry surface before application
  • Use hi thrust (26:1) manual dispensing tool
  • Remove Tape within 2 hours after applying epoxy
  • Do not touch applied epoxy for 24 hours

Additional Information

Storage & Shelf Life: 24 months when stored in unopened containers. Store between 40°F (4°C) and 95°F (35°C).

Clean up: Clean uncured material from tools and equipment with solvents such as xylene, toluene, MEK or acetone. Cured material is removed mechanically.

Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases (chemical resistance chart available).

Limited Warranty

RGF Materials Company (RGF) warrants product to be of good quality and will replace or, at our election, refund the purchase price of any products proved to be defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, RGF MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE RESPECTING ITS PRODUCTS, and RGF shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.